Polyethylene Female Adaptor
One of the most commonly used fittings in polyethylene pipe plumbing systems is the female adaptor. This fitting, with a female thread on one end, allows for quick and easy connection of polyethylene pipes to valves and other threaded fittings.
Female Adaptor Specification
- High Resistance: Resistant to corrosion, UV rays and pressure up to 10 bar.
- Easy Installation: Can be installed easily and without special tools.
- Proper Sealing: Creates a proper sealing system between the polyethylene pipe and any threaded fitting.
- Long Lifetime: Due to the polypropylene material of the fitting, it has a long life.
- Resistance to Chemicals: This fitting is resistant to most acids and chemical fertilizers.
Applications of the Female Adaptor
This fitting is used to connect polyethylene pipes to various threaded valves and parts and is used in irrigation systems and various industries.
Advantages of using polyethylene fitting
- Speed and ease of installation: Since this type of fitting does not require welding, its installation is very quick and easy.
- Low cost: It is installed in less time and costs less than other connection methods.
- Light weight: The lightness of this fitting, in addition to making it easy to transport and maintain, also makes it easy to install.
Fitting components and important points for installing
Fitting components: The female fitting on the side that is connected to the polyethylene pipe has components, each of which has a function and the correct arrangement and shape of which results in accurate connection. These components include: fitting body, sealing ring, split ring, bushing and fitting screw.
The following figure shows the order of these components:
- Selecting the right size: To make a proper fitting, the size of the female fitting must be matched to the size of the polyethylene pipe and the thread on the other side with the threaded fitting that must be closed on it.
- Using Teflon tape: To ensure complete sealing, it is better to use Teflon tape on the threaded fitting side.
- Tightly tightening the nut: The fitting nut should not be tightened enough to prevent leakage.
| Code | Size | Quantity |
| 10102001200 | 20×1/2” | 150 |
| 10102501200 | 25×1/2” | 150 |
| 10102503400 | 25×3/4” | 150 |
| 10102510000 | 25×1” | 150 |
| 10103201200 | 32×1/2” | 100 |
| 10103203400 | 32×3/4” | 100 |
| 10103210000 | 32×1” | 100 |
| 10104011400 | 40×1 1/4” | 45 |
| 10105011200 | 50×1 1/2” | 35 |
| 10105020000 | 50×2” | 35 |
| 10106311400 | 63×1 1/4” | 20 |
| 10106311200 | 63×1 1/2” | 20 |
| 10106320000 | 63×2” | 20 |
| 10107520000 | 75×2” | 13 |
| 10107521200 | 75×2 1/2” | 13 |
| 10109020000 | 90×2” | 10 |
| 10109021200 | 90×2 1/2” | 10 |
| 10109030000 | 90×3” | 10 |
| 10101103000 | 110×3” | 8 |
| 10101104000 | 110×4” | 8 |
| 10101254000 | 125×4” | 8 |
| 10101255000 | 125×5” | 8 |