Polyethylene Female Tee
One of the important fittings in piping systems with polyethylene pipes is the female tee. This fitting, due to its thread in its hub, allows for quick and easy connection of polyethylene pipes to valves and other threaded fittings.
Female Tee Specifications
- High Resistance: It is resistant to corrosion, UV rays and pressure up to 10 bar.
- Easy Installation: It can be installed easily and without special tools.
- Proper Sealing: It creates a proper sealing system between the polyethylene pipe and any threaded fitting.
- Long Lifetime: Due to the polypropylene material of the fitting, it has a long life.
- Resistance to Chemicals: This fitting is resistant to most acids and chemical fertilizers.
Applications of polyethylene female tee
This fitting is used to branch polyethylene pipes using valves and threaded fittings.
Advantages of using polyethylene female tee
- Speed and ease of installation: Since this type of fitting does not require welding, its installation is very quick and easy.
- Low cost: The material tee fitting is installed in less time and costs less than other connection methods.
- Light weight: The lightness of this fitting, in addition to making it easy to transport and maintain, also makes it easy to install.
Female polyethylene tee fitting components
fitting components: The female tee connection on the side that is connected to the polyethylene pipe has components, each of which has a function and its correct arrangement and shape ensures accurate sealing of the connection. These components include: the fitting body, the sealing ring, the split ring bushing and the fitting screw.
The order of these components is shown in the figure below:
Important tips for installing female tee fitting
- Choosing the right size: To make a proper connection, the size of the female tee must be matched to the size of the polyethylene pipe and its umbilical thread to the threaded fitting that must be closed on it.
- Using Teflon tape: To ensure complete sealing, it is better to use Teflon tape on the threaded fitting side.
- Tightly tightening the nut: The female tee nut must be tightened enough to prevent leakage.
| Code | Size | Quantity |
| 10902001200 | 20×1/2” | 80 |
| 10902501200 | 25×1/2” | 75 |
| 10902503400 | 25×3/4” | 75 |
| 10903201200 | 32×1/2” | 50 |
| 10903203400 | 32×3/4” | 50 |
| 10903210000 | 32×1” | 50 |
| 10904011400 | 40×1 1/4” | 24 |
| 10905011400 | 50×1 1/4” | 15 |
| 10905011200 | 50×1 1/2” | 15 |
| 10906301200 | 63×1/2” | 10 |
| 10906311200 | 63×1 1/2” | 10 |
| 10906320000 | 63×2” | 10 |
| 10907520000 | 75×2” | 6 |
| 10907521200 | 75×2 1/2” | 6 |
| 10909020000 | 90×2” | 5 |
| 10909021200 | 90×2 1/2” | 5 |
| 10909030000 | 90×3” | 5 |
| 10911300000 | 110×3” | 4 |
| 10911040000 | 110×4” | 4 |
| 10912540000 | 125×4” | 3 |
| 10912550000 | 125×5” | 3 |