Newfit Pipes and Fittings
This product is essentially made of polyethylene pipe equipped with quick‑coupling connectors on both ends. Newfit pipes and fittings easily lock into each other and create a secure, leak‑free seal, allowing a sprinkler irrigation network to be installed over a large area in a very short amount of time.
Farmers typically use Newfit pipes and fittings in rented farmlands or in situations where the irrigation network needs to be moved frequently. Their quick installation and portability make them an ideal choice for temporary or mobile sprinkler irrigation systems.
Features of Newfit Pipes and Fittings
- One of the key advantages of this system is its ability to be easily collected and removed during harvest season or non‑cultivation periods.
- Repairs or modifications within the network are very simple and can be carried out by non‑specialized workers with minimal training.
- This product features two ends of equal size—one male end equipped with a locking clip for secure coupling, and the other a female end used for connecting to adapters or clip‑type pipes. It is commonly used between branches of Newfit pipe networks.
Types of Newfit Pipes and Fittings
Newfit pipes and fittings are produced in a limited range of sizes, each available in specific pressure classes. The details are as follows:
- Size 63 mm: Pipes are available in three pressure ratings—4, 5, and 6 bar—while all fittings are uniformly rated at 6 bar.
- Size 75 mm: Pipes are available in pressure ratings of 4, 5, and 6 bar, with all fittings rated at 6 bar.
- Size 90 mm: Pipes are produced in pressure classes 4, 5, and 6 bar, and all fittings are rated at 6 bar.
- Size 110 mm: Pipes are available in pressure ratings of 4, 5, and 6 bar, with all fittings consistently rated at 6 bar.
| Sizes | Product Description | Product Name | Image |
| 50 , 63 , 75 , 90 , 110 | This product has a female end that locks with Newfit clamp-type male connectors. The other end is threaded and can be connected to saddles or other fittings depending on the application. | Newfit Female Pump Connector |  |
| 50 , 63 , 75 , 90 , 110 | This connector has a male (clip-type) end, and the opposite side is threaded for connection to saddles or other fittings. | Newfit Male Pump Connector |  |
| 50 , 63 , 75 , 90 , 110 | A type of connector used mainly at the beginning of the pipeline. It can be ordered with male or female ends. One side is male or female, and the other side has a flange to which a butterfly valve can be connected or sealed. | Newfit Flanged Connector |  |
| 63×1 and 75×1 | A Newfit sprinkler base used for installing sprinklers in sprinkler irrigation systems. | Polyethylene Sprinkler Base (Hook Type) |  |
| 50 , 63 , 75 , 90 , 110 , 125 | A circular protective cap, available in different shapes and types depending on the application. | Newfit Female End Cap |  |
| 63×75 , 63×90 , 75×90 , 63×110 , 75×110 , 90×110 , 63×125 , 75×125 , 90×125 , 110×125 | A reducer connector with two ends: one smaller and one larger, used for changing pipe sizes. | Newfit Reducer Connector |  |
| 50 , 63 , 75 , 90 , 110 , 125 | Used to change the pipe direction by 90 degrees. One end is male and the other is female. Produced in various sizes listed below. | Newfit Elbow |  |
| 75×63×75 , 90×63×90 , 90×75×90 , 110×63×110 , 110×75×110 , 110×90×110 , 125×63×125 , 125×75×125 , 125×90×125 , 125×110×125 | A reducing tee with two equal ends and one reduced-size end. One end is male (clip-type) and the other is female for locking Newfit pipes. | Newfit Reducing Tee |  |
| 63 , 75 , 90 , 110 , 125 | A tee with three equal ends: two male (clip-type) ends for locking with Newfit pipes and one female end for male connectors. | Newfit Equal Tee |  |
| 63 , 75 | A connector with one male and one female end, installed between pipes and fittings. | Newfit Valve |  |
| 50 , 63 , 75 , 90 , 110 , 125 | Used to convert standard polyethylene pipes to Newfit pipes. Installed on the pipe end with a male connector for Newfit systems. | Newfit Female Polyethylene Coupling |  |
| 50 , 63 , 75 , 90 , 110 , 125 | Used to connect Newfit female-end pipes. Installed on the pipe end with a female connector. | Newfit Male Hook Polyethylene Coupling |  |
| 50 , 63 , 75 , 90 , 110 | A connector with two equal-size ends: one male (clip-type) and one female, used between Newfit pipe branches. | Newfit Link Pipe |  |